LK – Pressurized Vertical Shaft Kiln and Revamping of existing Kiln
The LK vertical lime kiln is an innovative kiln where the cooling of the lime and the calcination process are completed under positive pressure.
Technical Data
CAPACITY FROM: 100 tpd to 500 tpd
RAW MATERIAL: Limestone
LIMESTONE SIZE: from 20 mm to 150 mm with ratio min/max size 1:2
FUELS: Any type of fuel can be used
Our klins are suitable for all kind of solid, liquid and gaseous Fuels.
Solid: Pulverized pet coke, pulverized coal, wood, sawdust etc.
Liquid: Heavy fuel oil, LDO etc.
Gaseous: Natural gas, producer gas, coke oven gas, blast furnace gas, mixed gas etc.
For any gas having lower calorific value (more than 1400 kcal/Nm3).
–
FUEL CONSUMPTION: <880 kcal/kg of lime
NOx EMISSION WITHIN EUROPEAN STANDARDS:
-
- Lower flame temperature
- Prevents the formation of NOx
ELECTRIC POWER CONSUMPTION: < 22 kWh/Ton of lime
LIME QUALITY: Soft burnt lime (T60 < 3 minutes) to Hard burnt lime (T60 > 6 minutes)
RESIDUAL CO2 IN THE LIME: < 1.5%
Limestone crusching and screening plant
The limestone arriving to the plant site from the quarry already screened in a proper range size, is unloaded in the receiving hopper in cement concrete.
The limestone is discharged by vibrating extractor and transported by belt conveyor to the vibrating screen to eliminate the fines generated during the handling and transportation from the quarry.
The vibrating screen feeds a weigh hopper equipped with a hydraulic gate to discharge the material into the skip bucket which feeds the kiln.